Performance/Street Fitment
Popular setup for this chassis.
BMW F80 M3 wheel specs and setup guide
Use this BMW F80 M3 fitment guide to compare front and rear wheel specs, tire sizes, clearance modification, and fitment types before choosing a setup.
Quick answer
A popular BMW F80 M3 setup is 18x10 ET25 front with 275/35R18 tires and 19x10 ET25 rear with 305/35R18 tires. This is categorized as Performance/Street Fitment; review the full table for the rest of the front and rear combinations people have run.
Wheel specs
Start with the factory specs before comparing aftermarket F80 M3 wheel fitment.
Chassis context
This guide covers popular fitment setups for the BMW F80 M3. It focuses on the key fitment details: fitment type, front wheel, rear wheel, front tire, rear tire, and listed clearance modification.
The fitment type is treated as the primary category. Featured setups are shown first, followed by a broader table of popular combinations people have run.
Popular setups
These F80 M3 fitment setups combine the vehicle-specific fitment data with the proven fitment recommendations.
Popular setup for this chassis.
Popular setup for this chassis.
Popular setup for this chassis.
Popular setup for this chassis.
Fitment type options
These setups are organized by fitment type. Front and rear specs are shown together because the setup works as a full pair, even when the fitment is square.
Aftermarket range
Fitment notes
These F-chassis BMWs retain the 5x120 bolt pattern and 72.56mm center bore, but use M14x1.25 wheel hardware rather than the M12x1.5 hardware found on many older E-chassis BMWs.
These setups are organized by fitment type, including Performance/Street Fitment, Track Fitment, Winter Setup, Flush/Aggressive Fitment, OEM+ Fitment. Use that label to separate practical setups from aggressive, track, winter, or drag-oriented combinations.
Each setup is shown as a full front/rear pair. Even square fitments keep separate front and rear fields so you can verify tire sizing, offsets, spacers, and clearance together.
Buyer notes
FAQ
Start with the featured setups and choose based on your fitment goal. One featured setup is 18x10 ET25 front and 19x10 ET25 rear, but the best setup depends on the fitment type you want.
Yes. Every setup keeps the front and rear wheel and tire specs together, even when the setup is square.
No. The fitment type, clearance notes, and fitment type should be reviewed before assuming a setup is direct bolt-on.
Keep researching
Browse the marketplace or compare your current setup against a new F80 M3 fitment.