Track Fitment
Track Fitment
Front Setup18x9 ET46265/35-18
Rear Setup18x10.5 ET44295/35-18
Track Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Porsche 718 Spyder wheel specs and setup guide
Porsche 718 Spyder Fitment Guide
Use this Porsche 718 Spyder fitment guide to compare documented wheel and tire setups with verified chassis metadata and hardware notes.
718 Spyder fitment718 Spyder fitment guidePorsche 718 Spyder wheel fitment718 Spyder wheel specs
Quick answer
What is the best 718 Spyder fitment?
A documented 718 Spyder setup is 18x9 ET46 front with 265/35-18 tires and 18x10.5 ET44 rear with 295/35-18 tires. Use the full table to compare other documented setups and verify body width, brake clearance, ride height, and hub hardware before ordering.
Wheel specs
718 Spyder Wheel Specs
Start with the factory specs before comparing aftermarket 718 Spyder wheel fitment.
Years2020-2023
Bolt Pattern5x130
Center Bore71.6mm
HardwareM14x1.5
Chassis context
718 Spyder Wheel Fitment Notes
This Porsche 718 Spyder guide compares documented wheel and tire setups with the factory hub specs that matter when shopping for wheels.
Use the setup table as a starting point, then confirm tire model, suspension height, alignment, brake package, and body clearance on the specific car before ordering.
Popular setups
Best 718 Spyder Wheel Fitment Setups
These 718 Spyder fitment setups combine the vehicle-specific fitment data with the proven fitment recommendations.
OEM+ Fitment
OEM+ Fitment
Front Setup20x9 ET50245/35-20
Rear Setup20x11 ET50295/30-20
OEM+ Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Performance/Street Fitment
Performance/Street Fitment
Front Setup19x9 ET50245/40-19
Rear Setup19x10.5 ET44285/35-19
Performance/Street Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Fitment type options
Popular 718 Spyder Fitments People Have Run
These setups are organized by fitment type. Front and rear specs are shown together because the setup works as a full pair, even when the fitment is square.
Fitment TypeFrontRear
Track Fitment18x9 ET46265/35-1818x10.5 ET44295/35-18
OEM+ Fitment20x9 ET50245/35-2020x11 ET50295/30-20
Performance/Street Fitment19x9 ET50245/40-1919x10.5 ET44285/35-19
Aftermarket range
718 Spyder Fitment Range
Common widths9-11 inches across documented setups
Offset rangeET41-ET50 across documented setups
Popular tires245/35-20, 245/40-19, 255/35-19, 265/35-18, 265/35-19, 285/35-19, 295/30-20, 295/35-18
Fitment notes
What to Know Before Buying 718 Spyder Wheels
Compare the Full Setup
The 718 Spyder fitment table keeps front and rear specs together so wheel width, offset, and tire size can be reviewed as a complete setup.
Check Clearance Before Ordering
Wheel width, offset, tire model, alignment, brake package, and ride height can all change clearance. Confirm inner suspension clearance, outer fender clearance, hub fit, and brake caliper clearance before ordering.
Factory sizes
718 Spyder OEM Wheel Sizes
SizeOffsetNotes
8.5Jx20 front / 11Jx20 rearET61 front / ET50 rear718 Spyder; 245/35ZR20 front, 295/30ZR20 rear. Porsche technical specs confirm exact values.
Buyer notes
718 Spyder Fitment Tips
- Start with the 718 Spyder factory hub specs: 5x130 bolt pattern, 71.6mm center bore, and M14x1.5 hardware.
- Compare front and rear specs together, especially on staggered setups where tire diameter and offset balance matter.
- Check brake clearance with the exact wheel design, not just diameter and offset.
- Use the wheel fitment calculator to compare poke, inset, and tire changes against your current setup.
FAQ
718 Spyder Fitment Guide Questions
What is the best 718 Spyder fitment?
A documented 718 Spyder setup is 18x9 ET46 front with 265/35-18 tires and 18x10.5 ET44 rear with 295/35-18 tires. Use the full table to compare other documented setups and verify body width, brake clearance, ride height, and hub hardware before ordering.
What bolt pattern is a Porsche 718 Spyder?
The Porsche 718 Spyder uses a 5x130 bolt pattern with a 71.6mm center bore and M14x1.5 wheel hardware.
Do I need to verify brake clearance on a 718 Spyder?
Yes. Diameter, width, and offset are not enough by themselves because spoke shape and brake package determine caliper clearance.
Find wheels for your 718 Spyder
Browse the marketplace or compare your current setup against a new 718 Spyder fitment.