Track Fitment
Track Fitment
Front Setup19x9.5 ET48255/35-19
Rear Setup19x11.5 ET72315/30-19
Track Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Porsche 991.2 Carrera S / Carrera T wheel specs and setup guide
Porsche 991.2 Carrera S / Carrera T Fitment Guide
Use this Porsche 991.2 Carrera S / Carrera T fitment guide to compare documented wheel and tire setups with verified chassis metadata and hardware notes.
991.2 Carrera S / Carrera T fitment991.2 Carrera S / Carrera T fitment guidePorsche 991.2 Carrera S / Carrera T wheel fitment991.2 Carrera S / Carrera T wheel specs
Quick answer
What is the best 991.2 Carrera S / Carrera T fitment?
A documented 991.2 Carrera S / Carrera T setup is 19x9.5 ET48 front with 255/35-19 tires and 19x11.5 ET72 rear with 315/30-19 tires. Use the full table to compare other documented setups and verify body width, brake clearance, ride height, and hub hardware before ordering.
Wheel specs
991.2 Carrera S / Carrera T Wheel Specs
Start with the factory specs before comparing aftermarket 991.2 Carrera S / Carrera T wheel fitment.
Years2017-2019
Bolt Pattern5x130
Center Bore71.6mm
HardwareM14x1.5
Chassis context
991.2 Carrera S / Carrera T Wheel Fitment Notes
This Porsche 991.2 Carrera S / Carrera T guide compares documented wheel and tire setups with the factory hub specs that matter when shopping for wheels.
Use the setup table as a starting point, then confirm tire model, suspension height, alignment, brake package, and body clearance on the specific car before ordering.
Popular setups
Best 991.2 Carrera S / Carrera T Wheel Fitment Setups
These 991.2 Carrera S / Carrera T fitment setups combine the vehicle-specific fitment data with the proven fitment recommendations.
Performance/Street Fitment
Performance/Street Fitment
Front Setup19x9 ET50255/35-19
Rear Setup19x11.5 ET72315/30-19
Performance/Street Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Fitment type options
Popular 991.2 Carrera S / Carrera T Fitments People Have Run
These setups are organized by fitment type. Front and rear specs are shown together because the setup works as a full pair, even when the fitment is square.
Fitment TypeFrontRear
Track Fitment19x9.5 ET48255/35-1919x11.5 ET72315/30-19
Performance/Street Fitment19x9 ET50255/35-1919x11.5 ET72315/30-19
Aftermarket range
991.2 Carrera S / Carrera T Fitment Range
Common widths9-11.5 inches across documented setups
Offset rangeET41-ET72 across documented setups
Popular tires245/35-20, 255/35-19, 305/30-20, 315/30-19
Fitment notes
What to Know Before Buying 991.2 Carrera S / Carrera T Wheels
Compare the Full Setup
The 991.2 Carrera S / Carrera T fitment table keeps front and rear specs together so wheel width, offset, and tire size can be reviewed as a complete setup.
Check Clearance Before Ordering
Wheel width, offset, tire model, alignment, brake package, and ride height can all change clearance. Confirm inner suspension clearance, outer fender clearance, hub fit, and brake caliper clearance before ordering.
Factory sizes
991.2 Carrera S / Carrera T OEM Wheel Sizes
SizeOffsetNotes
8.5Jx20 front / 11.5Jx20 rearET49 front / ET76 rear991.2 Carrera S/Carrera T representative 20-inch; 245/35ZR20 front, 305/30ZR20 rear.
Buyer notes
991.2 Carrera S / Carrera T Fitment Tips
- Start with the 991.2 Carrera S / Carrera T factory hub specs: 5x130 bolt pattern, 71.6mm center bore, and M14x1.5 hardware.
- Compare front and rear specs together, especially on staggered setups where tire diameter and offset balance matter.
- Check brake clearance with the exact wheel design, not just diameter and offset.
- Use the wheel fitment calculator to compare poke, inset, and tire changes against your current setup.
FAQ
991.2 Carrera S / Carrera T Fitment Guide Questions
What is the best 991.2 Carrera S / Carrera T fitment?
A documented 991.2 Carrera S / Carrera T setup is 19x9.5 ET48 front with 255/35-19 tires and 19x11.5 ET72 rear with 315/30-19 tires. Use the full table to compare other documented setups and verify body width, brake clearance, ride height, and hub hardware before ordering.
What bolt pattern is a Porsche 991.2 Carrera S / Carrera T?
The Porsche 991.2 Carrera S / Carrera T uses a 5x130 bolt pattern with a 71.6mm center bore and M14x1.5 wheel hardware.
Do I need to verify brake clearance on a 991.2 Carrera S / Carrera T?
Yes. Diameter, width, and offset are not enough by themselves because spoke shape and brake package determine caliper clearance.
Find wheels for your 991.2 Carrera S / Carrera T
Browse the marketplace or compare your current setup against a new 991.2 Carrera S / Carrera T fitment.