Performance/Street Fitment
Performance/Street Fitment
Front Setup18x8.5 ET44235/40-18
Rear Setup18x10 ET60275/35-18
Performance/Street Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Porsche 993 Carrera / Carrera 4 wheel specs and setup guide
Porsche 993 Carrera / Carrera 4 Fitment Guide
Use this Porsche 993 Carrera / Carrera 4 fitment guide to compare documented wheel and tire setups with verified chassis metadata and hardware notes.
993 Carrera / Carrera 4 fitment993 Carrera / Carrera 4 fitment guidePorsche 993 Carrera / Carrera 4 wheel fitment993 Carrera / Carrera 4 wheel specs
Quick answer
What is the best 993 Carrera / Carrera 4 fitment?
A documented 993 Carrera / Carrera 4 setup is 18x8.5 ET44 front with 235/40-18 tires and 18x10 ET60 rear with 275/35-18 tires. Use the full table to compare other documented setups and verify body width, brake clearance, ride height, and hub hardware before ordering.
Wheel specs
993 Carrera / Carrera 4 Wheel Specs
Start with the factory specs before comparing aftermarket 993 Carrera / Carrera 4 wheel fitment.
Years1994-1998
Bolt Pattern5x130
Center Bore71.6mm
HardwareM14x1.5
Chassis context
993 Carrera / Carrera 4 Wheel Fitment Notes
This Porsche 993 Carrera / Carrera 4 guide compares documented wheel and tire setups with the factory hub specs that matter when shopping for wheels.
Use the setup table as a starting point, then confirm tire model, suspension height, alignment, brake package, and body clearance on the specific car before ordering.
Popular setups
Best 993 Carrera / Carrera 4 Wheel Fitment Setups
These 993 Carrera / Carrera 4 fitment setups combine the vehicle-specific fitment data with the proven fitment recommendations.
Fitment type options
Popular 993 Carrera / Carrera 4 Fitments People Have Run
These setups are organized by fitment type. Front and rear specs are shown together because the setup works as a full pair, even when the fitment is square.
Fitment TypeFrontRear
Performance/Street Fitment18x8.5 ET44235/40-1818x10 ET60275/35-18
Aftermarket range
993 Carrera / Carrera 4 Fitment Range
Common widths8.5-10 inches across documented setups
Offset rangeET44-ET60 across documented setups
Popular tires235/40-18, 275/35-18
Fitment notes
What to Know Before Buying 993 Carrera / Carrera 4 Wheels
Compare the Full Setup
The 993 Carrera / Carrera 4 fitment table keeps front and rear specs together so wheel width, offset, and tire size can be reviewed as a complete setup.
Check Clearance Before Ordering
Wheel width, offset, tire model, alignment, brake package, and ride height can all change clearance. Confirm inner suspension clearance, outer fender clearance, hub fit, and brake caliper clearance before ordering.
Factory sizes
993 Carrera / Carrera 4 OEM Wheel Sizes
SizeOffsetNotes
7Jx16 front / 9Jx16 rearET55 front / ET70 rear1994-1998 Carrera/Carrera 4 base; 205/55ZR16 front, 245/45ZR16 rear.
7Jx17 front / 9Jx17 rearET55 front / ET55 rearOptional 17-inch package; 205/50ZR17 front, 255/40ZR17 rear.
8Jx18 front / 10Jx18 rearET52 front / ET65 rearOptional 18-inch package; 225/40ZR18 front, 265/35ZR18 rear.
Buyer notes
993 Carrera / Carrera 4 Fitment Tips
- Start with the 993 Carrera / Carrera 4 factory hub specs: 5x130 bolt pattern, 71.6mm center bore, and M14x1.5 hardware.
- Compare front and rear specs together, especially on staggered setups where tire diameter and offset balance matter.
- Check brake clearance with the exact wheel design, not just diameter and offset.
- Use the wheel fitment calculator to compare poke, inset, and tire changes against your current setup.
FAQ
993 Carrera / Carrera 4 Fitment Guide Questions
What is the best 993 Carrera / Carrera 4 fitment?
A documented 993 Carrera / Carrera 4 setup is 18x8.5 ET44 front with 235/40-18 tires and 18x10 ET60 rear with 275/35-18 tires. Use the full table to compare other documented setups and verify body width, brake clearance, ride height, and hub hardware before ordering.
What bolt pattern is a Porsche 993 Carrera / Carrera 4?
The Porsche 993 Carrera / Carrera 4 uses a 5x130 bolt pattern with a 71.6mm center bore and M14x1.5 wheel hardware.
Do I need to verify brake clearance on a 993 Carrera / Carrera 4?
Yes. Diameter, width, and offset are not enough by themselves because spoke shape and brake package determine caliper clearance.
Find wheels for your 993 Carrera / Carrera 4
Browse the marketplace or compare your current setup against a new 993 Carrera / Carrera 4 fitment.