Track Fitment
Track Fitment
Front Setup18x9 ET46245/35-18
Rear Setup18x11 ET60295/30-18
Track Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Porsche 996 Carrera / Carrera 4 wheel specs and setup guide
Porsche 996 Carrera / Carrera 4 Fitment Guide
Use this Porsche 996 Carrera / Carrera 4 fitment guide to compare documented wheel and tire setups with verified chassis metadata and hardware notes.
996 Carrera / Carrera 4 fitment996 Carrera / Carrera 4 fitment guidePorsche 996 Carrera / Carrera 4 wheel fitment996 Carrera / Carrera 4 wheel specs
Quick answer
What is the best 996 Carrera / Carrera 4 fitment?
A documented 996 Carrera / Carrera 4 setup is 18x9 ET46 front with 245/35-18 tires and 18x11 ET60 rear with 295/30-18 tires. Use the full table to compare other documented setups and verify body width, brake clearance, ride height, and hub hardware before ordering.
Wheel specs
996 Carrera / Carrera 4 Wheel Specs
Start with the factory specs before comparing aftermarket 996 Carrera / Carrera 4 wheel fitment.
Years1997-2004
Bolt Pattern5x130
Center Bore71.6mm
HardwareM14x1.5
Chassis context
996 Carrera / Carrera 4 Wheel Fitment Notes
This Porsche 996 Carrera / Carrera 4 guide compares documented wheel and tire setups with the factory hub specs that matter when shopping for wheels.
Use the setup table as a starting point, then confirm tire model, suspension height, alignment, brake package, and body clearance on the specific car before ordering.
Popular setups
Best 996 Carrera / Carrera 4 Wheel Fitment Setups
These 996 Carrera / Carrera 4 fitment setups combine the vehicle-specific fitment data with the proven fitment recommendations.
Performance/Street Fitment
Performance/Street Fitment
Front Setup18x8.5 ET45245/35-18
Rear Setup18x11 ET60295/30-18
Performance/Street Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Fitment type options
Popular 996 Carrera / Carrera 4 Fitments People Have Run
These setups are organized by fitment type. Front and rear specs are shown together because the setup works as a full pair, even when the fitment is square.
Fitment TypeFrontRear
Track Fitment18x9 ET46245/35-1818x11 ET60295/30-18
Performance/Street Fitment18x8.5 ET45245/35-1818x11 ET60295/30-18
Aftermarket range
996 Carrera / Carrera 4 Fitment Range
Common widths8.5-12 inches across documented setups
Offset rangeET45-ET63 across documented setups
Popular tires245/35-18, 295/30-18, 315/30-18
Fitment notes
What to Know Before Buying 996 Carrera / Carrera 4 Wheels
Compare the Full Setup
The 996 Carrera / Carrera 4 fitment table keeps front and rear specs together so wheel width, offset, and tire size can be reviewed as a complete setup.
Check Clearance Before Ordering
Wheel width, offset, tire model, alignment, brake package, and ride height can all change clearance. Confirm inner suspension clearance, outer fender clearance, hub fit, and brake caliper clearance before ordering.
Factory sizes
996 Carrera / Carrera 4 OEM Wheel Sizes
SizeOffsetNotes
7Jx17 front / 9Jx17 rearET55 front / ET55 rear1997-2001 3.4 Carrera/C4 base; 205/50ZR17 front, 255/40ZR17 rear.
7Jx17 front / 9Jx17 rearET50 front / ET55 rear2002-2004 3.6 C4 base; 205/50ZR17 front, 255/40ZR17 rear.
7.5Jx18 or 8Jx18 front / 10Jx18 rearET50-52 front / ET65 rearOptional 18-inch packages; 225/40ZR18 front with 265/35ZR18 or 285/30ZR18 rear depending trim.
Buyer notes
996 Carrera / Carrera 4 Fitment Tips
- Start with the 996 Carrera / Carrera 4 factory hub specs: 5x130 bolt pattern, 71.6mm center bore, and M14x1.5 hardware.
- Compare front and rear specs together, especially on staggered setups where tire diameter and offset balance matter.
- Check brake clearance with the exact wheel design, not just diameter and offset.
- Use the wheel fitment calculator to compare poke, inset, and tire changes against your current setup.
FAQ
996 Carrera / Carrera 4 Fitment Guide Questions
What is the best 996 Carrera / Carrera 4 fitment?
A documented 996 Carrera / Carrera 4 setup is 18x9 ET46 front with 245/35-18 tires and 18x11 ET60 rear with 295/30-18 tires. Use the full table to compare other documented setups and verify body width, brake clearance, ride height, and hub hardware before ordering.
What bolt pattern is a Porsche 996 Carrera / Carrera 4?
The Porsche 996 Carrera / Carrera 4 uses a 5x130 bolt pattern with a 71.6mm center bore and M14x1.5 wheel hardware.
Do I need to verify brake clearance on a 996 Carrera / Carrera 4?
Yes. Diameter, width, and offset are not enough by themselves because spoke shape and brake package determine caliper clearance.
Find wheels for your 996 Carrera / Carrera 4
Browse the marketplace or compare your current setup against a new 996 Carrera / Carrera 4 fitment.