Track Fitment
Track Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Porsche 996 GT2 wheel specs and setup guide
Use this Porsche 996 GT2 fitment guide to compare front and rear wheel specs, tire sizes, hub hardware, and fitment types before choosing a setup.
Quick answer
A popular 996 GT2 setup is 18x10 ET36 front with 275/35-18 tires and 18x12 ET45 rear with 315/30-18 tires. Review the full table for the rest of the combinations people have run, then double-check body width, brake clearance, ride height, and hub hardware before ordering.
Wheel specs
Start with the factory specs before comparing aftermarket 996 GT2 wheel fitment.
Chassis context
This guide covers popular fitment setups for the Porsche 996 GT2, plus the factory hub specs that matter when shopping for wheels.
Featured setups are shown first, followed by a broader table of combinations people have run. Use those as a starting point, then confirm tire model, suspension height, alignment, brake package, and body clearance on your car before ordering.
Popular setups
These 996 GT2 fitment setups combine the vehicle-specific fitment data with the proven fitment recommendations.
Track Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Performance/Street Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Fitment type options
These setups are organized by fitment type. Front and rear specs are shown together because the setup works as a full pair, even when the fitment is square.
Aftermarket range
Fitment notes
The 996 GT2 fitment table keeps front and rear specs together so wheel width, offset, and tire size can be reviewed as a complete setup.
Wheel width, offset, tire model, alignment, brake package, and ride height can all change clearance. Confirm inner suspension clearance, outer fender clearance, hub fit, and brake caliper clearance before ordering.
Factory sizes
Buyer notes
FAQ
A popular 996 GT2 setup is 18x10 ET36 front with 275/35-18 tires and 18x12 ET45 rear with 315/30-18 tires. Review the full table for the rest of the combinations people have run, then double-check body width, brake clearance, ride height, and hub hardware before ordering.
The Porsche 996 GT2 uses a 5x130 bolt pattern with a 71.6mm center bore and M14x1.5 wheel hardware.
Yes. Diameter, width, and offset are not enough by themselves because spoke shape and brake package determine caliper clearance.
Browse the marketplace or compare your current setup against a new 996 GT2 fitment.