Flush/Aggressive Fitment
Flush/Aggressive Fitment
Front Setup18x9.5 ET35255/35
Rear Setup18x9.5 ET35255/35
Flush/Aggressive Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Toyota E210 Corolla Hatchback XSE wheel specs and setup guide
Toyota E210 Corolla Hatchback XSE Fitment Guide
Use this Toyota E210 Corolla Hatchback XSE fitment guide to compare documented wheel and tire setups with verified chassis metadata and hardware notes.
E210 Corolla Hatchback XSE fitmentE210 Corolla Hatchback XSE fitment guideToyota E210 Corolla Hatchback XSE wheel fitmentE210 Corolla Hatchback XSE wheel specs
Quick answer
What is the best E210 Corolla Hatchback XSE fitment?
A documented E210 Corolla Hatchback XSE setup is 18x9.5 ET35 front with 255/35 tires and 18x9.5 ET35 rear with 255/35 tires. Use the full table to compare other documented setups and verify body width, brake clearance, ride height, and hub hardware before ordering.
Wheel specs
E210 Corolla Hatchback XSE Wheel Specs
Start with the factory specs before comparing aftermarket E210 Corolla Hatchback XSE wheel fitment.
Years2019-Present
Bolt Pattern5x100
Center Bore54.1mm
HardwareM12x1.5
Chassis context
E210 Corolla Hatchback XSE Wheel Fitment Notes
This Toyota E210 Corolla Hatchback XSE guide compares documented wheel and tire setups with the factory hub specs that matter when shopping for wheels.
Use the setup table as a starting point, then confirm tire model, suspension height, alignment, brake package, and body clearance on the specific car before ordering.
Popular setups
Best E210 Corolla Hatchback XSE Wheel Fitment Setups
These E210 Corolla Hatchback XSE fitment setups combine the vehicle-specific fitment data with the proven fitment recommendations.
OEM+ Fitment
OEM+ Fitment
Front Setup18x9 ET33225/40
Rear Setup18x9 ET33225/40
OEM+ Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Fitment type options
Popular E210 Corolla Hatchback XSE Fitments People Have Run
These setups are organized by fitment type. Front and rear specs are shown together because the setup works as a full pair, even when the fitment is square.
Fitment TypeFrontRear
Flush/Aggressive Fitment18x9.5 ET35255/3518x9.5 ET35255/35
OEM+ Fitment18x9 ET33225/4018x9 ET33225/40
Aftermarket range
E210 Corolla Hatchback XSE Fitment Range
Common widths8.5-9.5 inches across documented setups
Offset rangeET22-ET35 across documented setups
Popular tires215/35, 215/40, 225/40, 245/35, 255/35
Fitment notes
What to Know Before Buying E210 Corolla Hatchback XSE Wheels
Compare the Full Setup
The E210 Corolla Hatchback XSE fitment table keeps front and rear specs together so wheel width, offset, and tire size can be reviewed as a complete setup.
Check Clearance Before Ordering
Wheel width, offset, tire model, alignment, brake package, and ride height can all change clearance. Confirm inner suspension clearance, outer fender clearance, hub fit, and brake caliper clearance before ordering.
Factory sizes
E210 Corolla Hatchback XSE OEM Wheel Sizes
SizeOffsetNotes
18x8 squareET40E210 Corolla Hatchback XSE/SE 2.0 sport package; 225/40R18 tires.
Buyer notes
E210 Corolla Hatchback XSE Fitment Tips
- Start with the E210 Corolla Hatchback XSE factory hub specs: 5x100 bolt pattern, 54.1mm center bore, and M12x1.5 hardware.
- Compare front and rear specs together, especially on staggered setups where tire diameter and offset balance matter.
- Check brake clearance with the exact wheel design, not just diameter and offset.
- Use the wheel fitment calculator to compare poke, inset, and tire changes against your current setup.
FAQ
E210 Corolla Hatchback XSE Fitment Guide Questions
What is the best E210 Corolla Hatchback XSE fitment?
A documented E210 Corolla Hatchback XSE setup is 18x9.5 ET35 front with 255/35 tires and 18x9.5 ET35 rear with 255/35 tires. Use the full table to compare other documented setups and verify body width, brake clearance, ride height, and hub hardware before ordering.
What bolt pattern is a Toyota E210 Corolla Hatchback XSE?
The Toyota E210 Corolla Hatchback XSE uses a 5x100 bolt pattern with a 54.1mm center bore and M12x1.5 wheel hardware.
Do I need to verify brake clearance on a E210 Corolla Hatchback XSE?
Yes. Diameter, width, and offset are not enough by themselves because spoke shape and brake package determine caliper clearance.
Find wheels for your E210 Corolla Hatchback XSE
Browse the marketplace or compare your current setup against a new E210 Corolla Hatchback XSE fitment.