Level Kit Fitment
Level Kit Fitment
Front Setup17x9 ET-12285/70-17
Rear Setup17x9 ET-12285/70-17
Level Kit Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Toyota N210 4th Gen 4Runner wheel specs and setup guide
Toyota N210 4th Gen 4Runner Fitment Guide
Use this Toyota N210 4th Gen 4Runner fitment guide to compare documented wheel and tire setups with verified chassis metadata and hardware notes.
N210 4th Gen 4Runner fitmentN210 4th Gen 4Runner fitment guideToyota N210 4th Gen 4Runner wheel fitmentN210 4th Gen 4Runner wheel specs
Quick answer
What is the best N210 4th Gen 4Runner fitment?
A documented N210 4th Gen 4Runner setup is 17x9 ET-12 front with 285/70-17 tires and 17x9 ET-12 rear with 285/70-17 tires. Use the full table to compare other documented setups and verify body width, brake clearance, ride height, and hub hardware before ordering.
Wheel specs
N210 4th Gen 4Runner Wheel Specs
Start with the factory specs before comparing aftermarket N210 4th Gen 4Runner wheel fitment.
Years2003-2009
Bolt Pattern6x139.7
Center Bore106.1mm
HardwareM12x1.5
Chassis context
N210 4th Gen 4Runner Wheel Fitment Notes
This Toyota N210 4th Gen 4Runner guide compares documented wheel and tire setups with the factory hub specs that matter when shopping for wheels.
Use the setup table as a starting point, then confirm tire model, suspension height, alignment, brake package, and body clearance on the specific car before ordering.
Popular setups
Best N210 4th Gen 4Runner Wheel Fitment Setups
These N210 4th Gen 4Runner fitment setups combine the vehicle-specific fitment data with the proven fitment recommendations.
Lifted Fitment
Lifted Fitment
Front Setup17x8.5 ET-10265/70-17
Rear Setup17x8.5 ET-10265/70-17
Lifted Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
OEM+ Fitment
OEM+ Fitment
Front Setup17x7.5 ET30265/70-17
Rear Setup17x7.5 ET30265/70-17
OEM+ Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Fitment type options
Popular N210 4th Gen 4Runner Fitments People Have Run
These setups are organized by fitment type. Front and rear specs are shown together because the setup works as a full pair, even when the fitment is square.
Fitment TypeFrontRear
Level Kit Fitment17x9 ET-12285/70-1717x9 ET-12285/70-17
Lifted Fitment17x8.5 ET-10265/70-1717x8.5 ET-10265/70-17
OEM+ Fitment17x7.5 ET30265/70-1717x7.5 ET30265/70-17
Aftermarket range
N210 4th Gen 4Runner Fitment Range
Common widths7.5-9 inches across documented setups
Offset rangeET-12-ET30 across documented setups
Popular tires265/70-17, 285/70-17, 315/70-17, 35x12.50-17
Fitment notes
What to Know Before Buying N210 4th Gen 4Runner Wheels
Compare the Full Setup
The N210 4th Gen 4Runner fitment table keeps front and rear specs together so wheel width, offset, and tire size can be reviewed as a complete setup.
Check Clearance Before Ordering
Wheel width, offset, tire model, alignment, brake package, and ride height can all change clearance. Confirm inner suspension clearance, outer fender clearance, hub fit, and brake caliper clearance before ordering.
Factory sizes
N210 4th Gen 4Runner OEM Wheel Sizes
SizeOffsetNotes
16x7 squareET302003-2009 SR5/common 16-inch package; 265/70R16 tires.
17x7.5 squareET302003-2009 Sport/Limited/common 17-inch package; 265/65R17 tires.
18x7.5 squareET252006-2009 facelift 18-inch package; 265/60R18 tires.
Buyer notes
N210 4th Gen 4Runner Fitment Tips
- Start with the N210 4th Gen 4Runner factory hub specs: 6x139.7 bolt pattern, 106.1mm center bore, and M12x1.5 hardware.
- Compare front and rear specs together, especially on staggered setups where tire diameter and offset balance matter.
- Check brake clearance with the exact wheel design, not just diameter and offset.
- Use the wheel fitment calculator to compare poke, inset, and tire changes against your current setup.
FAQ
N210 4th Gen 4Runner Fitment Guide Questions
What is the best N210 4th Gen 4Runner fitment?
A documented N210 4th Gen 4Runner setup is 17x9 ET-12 front with 285/70-17 tires and 17x9 ET-12 rear with 285/70-17 tires. Use the full table to compare other documented setups and verify body width, brake clearance, ride height, and hub hardware before ordering.
What bolt pattern is a Toyota N210 4th Gen 4Runner?
The Toyota N210 4th Gen 4Runner uses a 6x139.7 bolt pattern with a 106.1mm center bore and M12x1.5 wheel hardware.
Do I need to verify brake clearance on a N210 4th Gen 4Runner?
Yes. Diameter, width, and offset are not enough by themselves because spoke shape and brake package determine caliper clearance.
Find wheels for your N210 4th Gen 4Runner
Browse the marketplace or compare your current setup against a new N210 4th Gen 4Runner fitment.