OEM+ Fitment
OEM+ Fitment
Front Setup17x8 ET40225/45-17
Rear Setup17x8 ET40225/45-17
OEM+ Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Toyota T230 7th Gen Celica wheel specs and setup guide
Toyota T230 7th Gen Celica Fitment Guide
Use this Toyota T230 7th Gen Celica fitment guide to compare documented wheel and tire setups with verified chassis metadata and hardware notes.
T230 7th Gen Celica fitmentT230 7th Gen Celica fitment guideToyota T230 7th Gen Celica wheel fitmentT230 7th Gen Celica wheel specs
Quick answer
What is the best T230 7th Gen Celica fitment?
A documented T230 7th Gen Celica setup is 17x8 ET40 front with 225/45-17 tires and 17x8 ET40 rear with 225/45-17 tires. Use the full table to compare other documented setups and verify body width, brake clearance, ride height, and hub hardware before ordering.
Wheel specs
T230 7th Gen Celica Wheel Specs
Start with the factory specs before comparing aftermarket T230 7th Gen Celica wheel fitment.
Years2000-2005
Bolt Pattern5x100
Center Bore54.1mm
HardwareM12x1.5
Chassis context
T230 7th Gen Celica Wheel Fitment Notes
This Toyota T230 7th Gen Celica guide compares documented wheel and tire setups with the factory hub specs that matter when shopping for wheels.
Use the setup table as a starting point, then confirm tire model, suspension height, alignment, brake package, and body clearance on the specific car before ordering.
Popular setups
Best T230 7th Gen Celica Wheel Fitment Setups
These T230 7th Gen Celica fitment setups combine the vehicle-specific fitment data with the proven fitment recommendations.
Performance/Street Fitment
Performance/Street Fitment
Front Setup17x8.5 ET44235/40-17
Rear Setup17x8.5 ET44235/40-17
Performance/Street Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Fitment type options
Popular T230 7th Gen Celica Fitments People Have Run
These setups are organized by fitment type. Front and rear specs are shown together because the setup works as a full pair, even when the fitment is square.
Fitment TypeFrontRear
OEM+ Fitment17x8 ET40225/45-1717x8 ET40225/45-17
Performance/Street Fitment17x8.5 ET44235/40-1717x8.5 ET44235/40-17
Aftermarket range
T230 7th Gen Celica Fitment Range
Common widths8-9 inches across documented setups
Offset rangeET35-ET44 across documented setups
Popular tires225/45-17, 235/40-17, 245/40-17
Fitment notes
What to Know Before Buying T230 7th Gen Celica Wheels
Compare the Full Setup
The T230 7th Gen Celica fitment table keeps front and rear specs together so wheel width, offset, and tire size can be reviewed as a complete setup.
Check Clearance Before Ordering
Wheel width, offset, tire model, alignment, brake package, and ride height can all change clearance. Confirm inner suspension clearance, outer fender clearance, hub fit, and brake caliper clearance before ordering.
Factory sizes
T230 7th Gen Celica OEM Wheel Sizes
SizeOffsetNotes
15x6.5 squareET39T230 Celica base/representative OE; 195/60R15 tires.
16x6.5 squareET39GT-S/sport-style listed package; 205/50R16 tires. OE marking varies by trim/market.
Buyer notes
T230 7th Gen Celica Fitment Tips
- Start with the T230 7th Gen Celica factory hub specs: 5x100 bolt pattern, 54.1mm center bore, and M12x1.5 hardware.
- Compare front and rear specs together, especially on staggered setups where tire diameter and offset balance matter.
- Check brake clearance with the exact wheel design, not just diameter and offset.
- Use the wheel fitment calculator to compare poke, inset, and tire changes against your current setup.
FAQ
T230 7th Gen Celica Fitment Guide Questions
What is the best T230 7th Gen Celica fitment?
A documented T230 7th Gen Celica setup is 17x8 ET40 front with 225/45-17 tires and 17x8 ET40 rear with 225/45-17 tires. Use the full table to compare other documented setups and verify body width, brake clearance, ride height, and hub hardware before ordering.
What bolt pattern is a Toyota T230 7th Gen Celica?
The Toyota T230 7th Gen Celica uses a 5x100 bolt pattern with a 54.1mm center bore and M12x1.5 wheel hardware.
Do I need to verify brake clearance on a T230 7th Gen Celica?
Yes. Diameter, width, and offset are not enough by themselves because spoke shape and brake package determine caliper clearance.
Find wheels for your T230 7th Gen Celica
Browse the marketplace or compare your current setup against a new T230 7th Gen Celica fitment.