OEM+ Fitment
OEM+ Fitment
Front Setup19x9 ET42245/35-19
Rear Setup19x9 ET42245/35-19
OEM+ Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Audi 8V RS 3 wheel specs and setup guide
Audi 8V RS 3 Fitment Guide
Use this Audi 8V RS 3 fitment guide to compare front and rear wheel specs, tire sizes, hub hardware, and fitment types before choosing a setup.
8V RS 3 fitment8V RS 3 fitment guideAudi 8V RS 3 wheel fitment8V RS 3 wheel specs
Quick answer
What is the best 8V RS 3 fitment?
A popular 8V RS 3 setup is 19x9 ET42 front with 245/35-19 tires and 19x9 ET42 rear with 245/35-19 tires. Review the full table for the rest of the combinations people have run, then double-check body width, brake clearance, ride height, and hub hardware before ordering.
Wheel specs
8V RS 3 Wheel Specs
Start with the factory specs before comparing aftermarket 8V RS 3 wheel fitment.
Years2017-2020
Bolt Pattern5x112
Center Bore57.1mm
HardwareM14x1.5
Chassis context
How to Read This 8V RS 3 Fitment Guide
This guide covers popular fitment setups for the Audi 8V RS 3, plus the factory hub specs that matter when shopping for wheels.
Featured setups are shown first, followed by a broader table of combinations people have run. Use those as a starting point, then confirm tire model, suspension height, alignment, brake package, and body clearance on your car before ordering.
Popular setups
Best 8V RS 3 Wheel Fitment Setups
These 8V RS 3 fitment setups combine the vehicle-specific fitment data with the proven fitment recommendations.
Performance/Street Fitment
Performance/Street Fitment
Front Setup18x9.5 ET41Verify tire size
Rear Setup18x9.5 ET41Verify tire size
Performance/Street Fitment reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Winter Setup
Winter Setup
Front Setup18x9 ET42Verify tire size
Rear Setup18x9 ET42Verify tire size
Winter Setup reference setup. Verify tire model, camber, brake clearance, and ride height before ordering.
Fitment type options
Popular 8V RS 3 Fitments People Have Run
These setups are organized by fitment type. Front and rear specs are shown together because the setup works as a full pair, even when the fitment is square.
Fitment TypeFrontRear
OEM+ Fitment18x9 ET42Verify tire size18x9 ET42Verify tire size
OEM+ Fitment19x9 ET42245/35-1919x9 ET42245/35-19
Performance/Street Fitment18x9.5 ET41Verify tire size18x9.5 ET41Verify tire size
Winter Setup18x9 ET42Verify tire size18x9 ET42Verify tire size
Aftermarket range
8V RS 3 Fitment Range
Common widths9-9.5 inches across popular setups
Offset rangeET41-ET42 across popular setups
Popular tires245/35-19
Fitment notes
What to Know Before Buying 8V RS 3 Wheels
Compare the Full Setup
The 8V RS 3 fitment table keeps front and rear specs together so wheel width, offset, and tire size can be reviewed as a complete setup.
Check Clearance Before Ordering
Wheel width, offset, tire model, alignment, brake package, and ride height can all change clearance. Confirm inner suspension clearance, outer fender clearance, hub fit, and brake caliper clearance before ordering.
Factory sizes
8V RS 3 OEM Wheel Sizes
SizeOffsetNotes
19x8 squareET422017-2020 US RS 3 sedan standard OE; 235/35R19 tires.
19x8.5 front / 19x8 rearET46 front / ET42 rearOptional staggered OE (Dynamic package); 255/30R19 front, 235/35R19 rear.
Buyer notes
8V RS 3 Fitment Tips
- Start with the 8V RS 3 factory hub specs: 5x112 bolt pattern, 57.1mm center bore, and M14x1.5 hardware.
- Compare front and rear specs together, especially on staggered setups where tire diameter and offset balance matter.
- Check brake clearance with the exact wheel design, not just diameter and offset.
- Use the wheel fitment calculator to compare poke, inset, and tire changes against your current setup.
FAQ
8V RS 3 Fitment Guide Questions
What is the best 8V RS 3 fitment?
A popular 8V RS 3 setup is 19x9 ET42 front with 245/35-19 tires and 19x9 ET42 rear with 245/35-19 tires. Review the full table for the rest of the combinations people have run, then double-check body width, brake clearance, ride height, and hub hardware before ordering.
What bolt pattern is an Audi 8V RS 3?
The Audi 8V RS 3 uses a 5x112 bolt pattern with a 57.1mm center bore and M14x1.5 wheel hardware.
Do I need to verify brake clearance on a 8V RS 3?
Yes. Diameter, width, and offset are not enough by themselves because spoke shape and brake package determine caliper clearance.
Find wheels for your 8V RS 3
Browse the marketplace or compare your current setup against a new 8V RS 3 fitment.